Product Description

Bosch Rexroth develops and supplies world-leading motion control technologies at a very affordable cost. The company manufactures electrical industrial automation products such as drive controllers, servo amplifiers, and power tools.

The DDS02.1-W015-RS01-01 model is a digital intelligent drive controller integrated with resolver feedback. The resolver feedback assists in controlling the position and speed of the attached MDD, MKD, LAR, and LAF electric motors. The DDS02.1 drive controller must be used under prescribed operating conditions with the rated current requirement of 15 A. The module uses the SERCOS interface for developing efficient and real-time communication with the attached devices and modules. The complete drive controller is equipped with a basic unit, a command communication card, auxiliary plug-in modules, firmware, and a rating plate. The DDS02.1 drive controller uses the air from inside the control cabinet to maintain the overall temperature of the drive controller. The controller is highly recommended to be mounted in the switchgear cabinet of minimum IP54 ingress protection due to its IP20 protection category. During mounting, make sure that the mounting place should not contain any dust particles and the device is fully functional. In case of any error or fault, you can replace it within the one-year of purchase. Some of the basic applications of DDS drive controllers are machine tools, packaging machines, and robotics.

The model DDS02.1-W015-RS01-01 comes with 5 plug-in slots that can be configured according to the required functions. Slot 5 of the module is designated for a firmware module (DSM02.1) that contains all of the operating parameters. The controller must be installed under the surrounding temperature range of 0 to +45 degree Celsius. The DDS02.1 controller is widely used in the international market to develop a rapid-response motion control system. You can get this product (DDS02.1-W015-RS01-01) along with a one-year warranty from Wake Industrial.