Product Description

The Bosch Rexroth DDS02.1-F200-DA01-00 is an AC drive controller. It is designed for direct connection to three-phase AC mains. The input voltage rating is 380 to 460 Volts AC. The line frequency range is 50 to 60 Hertz. The rated output of the DDS02.1-F200-DA01-00 is 200 Amps. A coolant is required for cooling the drive controller. The communication module on the DDS 2.1 controllers can be either SERCOS or analog. The DDS02.1-F200-DA01-00 comes with an analog communication module. The value of the nominal DC bus voltage is 300 Volts DC. A maximum variation of 15% is permitted for the DC bus voltage. The current consumption of the basic unit is 150 milliamps at +15 Volts DC, 150 milliamps at -15 Volts DC and 500 milliamps at 24 Volts DC. The allowed range of ambient temperatures with rated data is 0 to 45 degrees Celsius.

The DDS02.1-F200-DA01-00 can be operated at maximum temperature of 55 degrees Celsius. However the drive output derates between 45 and 55 degrees Celsius. During storage and temperature, the ambient temperature that is allowed is -30 to 85 degrees Celsius. The maximum installation elevation with rated data is 1000 meters. The maximum allowed relative air humidity is 95% and the maximum allowed absolute air humidity is 25 grams per cubic meters. The actual energy loss of an operating DDS02.1-F200-DA01-00 controller depends on the continuous current at standstill of the connected motor. The motor current at standstill is listed in the motor documentation. The DDS02.1-F200-DA01-00 drive controller and its supply are designed for mounting into a control cabinet. The drive enclosure is IP10 rated. Weight of the liquid cooled DDS02.1-F200-DA01-00 is approximately 11 kilograms.