Product Description

The DDC01.1-K150A-DL20-00 servo drive from Bosch Rexroth is a digital AC drive. The servo drive comes equipped with a one-axis positioning module. This combination allows the drive to function as a digital single-axis positioning controller. The product has a brushless design and is controlled by a microprocessor. The device features high dynamics and precision. The positioning module helps to match the drive to the electrical and mechanical characteristics of the machine housing it by means of parameters. The drive controller for the servo drive supports compact housing and encompasses an IP 65 level of protection. The integrated bleeder resistor becomes very hot during operation.

The product can be implemented as a part of a drive package comprising multiple drive controllers and a single supply unit. The device is a good choice for fulfilling the needs of complex finishing facilities such as transfer systems. It is primarily used in conjunction with the manufacturer’s MDD series of AC servomotors. The connection between the motor and the drive is achieved through motor power and motor feedback cables. The controller associated with the drive is programmable with a maximum of 3,000 blocks. The positioning module encompasses a 9-pin D-sub male plug-in connector and a female 34-pin connector on its front panel. The DDC01.1-K150A-DL20-00 drive is backed by a one-year warranty.

The servo drive belongs to the DDC product group of similar drives from the manufacturer. The parameters of this product along with its operating software are stored in its DSM software module. The device can be fitted with three types of input/output interfaces with multiple inputs and outputs for exchanging binary signals. Its configuration rating-plate comprises details of the basic unit, the configured drive controller, the plug-in modules fitted in U1 to U4 slots, and the software module in the U5 slot. The servo drive can be shipped to any international destination.