DDC01.1-K050B-RL24-01-FW

Product Description:

Bosch Rexroth Indramat is an engineering company internationally recognized as one of the leading producers of cost-efficient automation machines that provide long-lasting solutions to industrial automation problems. The DDC01.1-K050B-RL24-01-FW is an intelligent controller unit from the manufacturer; it is built to monitor and ensure the proper operation of AC servo motor units widely used in automation operations. The power supply requirement of this unit is between 100 and about 240 volts, and the converter is estimated to consume about 14.5 watts of power during its operation. There are about two CAN interfaces present in this converter unit; these enable smooth communication between the drive and other devices in the servo system. The DDC01.1-K050B-RL24-01-FW is classified under the IP65 protection category, making it possible to function in environments that will normally be considered too harsh for conventional controller units.

The DDC01.1-K050B-RL24-01-FW drive controller operates with an input voltage of between 100 to about 240 volts; the rated input current for the unit is also about 50 amperes. A two-digit LED display unit is on the front panel of this unit, allowing operators to monitor operation status, warnings, and error signals. A fault reset key can be used to restart the unit after an error has been fixed.

The DDC01.1-K050B-RL24-01-FW frequency converter features five slots labelled from U1 to U5; these slots are intended for the software module, command interface card, and the auxiliary plug-in module. The two major connectors for this unit include the motor power connector and the main connection. The interfaces for these connections are located under the drive and maintain the IP65 protection standard of the drive itself. Operators that want to operate this unit without derating should ensure that its installation height does not exceed 1000 meters above sea level.