DDC01.1-K050B-DS51-01-FW

Product Description:

DDC01.1-K050B-DS51-01-FW is a drive controller that controls and monitors the speed and position of industrial machines. Designed by Indramat, it comes with an integral DLC single-axis positioning module and is specifically built to meet the complex demands of finishing systems such as transfer lines. With a protection rating of IP65, the controller can be mounted directly onto the forward feed unit. This eliminates the need for long motor power and feedback cables, which often run through the entire facility and are prone to faults. The forward feed unit can also function as a standalone system and can be tested independently of the main machine.

For the DDC01.1-K050B-DS51-01-FW drive controller to function optimally, it must be supplied with a rated current of 50 amperes. Once powered, the drive controller continuously communicates with the motor through feedback signals. It sends electrical pulses to control the motor’s rotation in order for the motor to adjust its speed, torque, and position. By using its integrated signal processor and high-resolution rotor position measurement system, this drive controller can detect the exact location of the motor shaft and make rapid corrections to ensure precise movement.

The DDC01.1-K050B-DS51-01-FW is a highly durable drive controller with built-in systems designed to handle malfunctions. In the event of a fault, it can respond in one of three ways, depending on the selected error reaction mode. It can brake at maximum torque and then automatically power down. This is known as Error Reaction 1. The second Error Reaction is a brake at maximum torque without powering down. The third error reaction is disconnecting torque while keeping the power supply intact. These responses help protect the connected motor and mechanical system, prevent further damage, and ensure safety during error conditions.