Product Description:

The DDC01.2-N200A-DS01-02-FW is a digital intelligent servo drive manufactured by Bosch Rexroth Indramat within the DDC Digital Intelligent Servo Drives series. Acting as a stand-alone axis controller, it converts bus commands into regulated three-phase output for precise torque and speed control in packaging, handling, and tooling equipment. The unit is a digital intelligent servo drive with Function Code 01 and hardware version 2. Its closed-loop design allows the controller to maintain stable axis motion during changes in load and speed. This arrangement is suited to single-axis applications that require fast response, repeatable speed regulation, and direct integration with coordinated motion systems.

The power stage can deliver a continuous motor current of 200 A. The drive draws 22.5 kVA from the mains and can pass mechanical shaft power up to 7.5 kW under rated conditions. Pulse-width modulation is carried out at 4 kHz, balancing switching losses and torque smoothness. Motion and parameter data enter through the SERCOS interface command module, while digital servo feedback from the motor closes the control loop. It also has an S6-100 s current rating of 90 A for intermittent duty, and normal operation dissipates 500 W as heat. Noise emission is listed as standard for this current class, and the controller belongs to Series 1.

During braking events, the internal bleeder can absorb 40 kW for brief peaks, and the DC bus can redirect up to 20 kWs of regenerated energy before dissipation. Standard cooling keeps component temperatures stable during operation. The sealed enclosure has an IP65 rating that resists dust and low-pressure water jets, and the assembly weighs 22 kg. Installation is permitted at altitudes up to 1000 m, and the integrated service connector allows access without opening the housing. The enclosed format allows the drive to be mounted on the machine where cabinet space is limited.