Product Description:

The DDC01.2-N200A-DL08-01-FW is a drive controller in the DDC Digital Intelligent Servo Drives series. It combines power regulation and axis control for a single servo motor in automated assembly lines, packaging stations, and similar motion-focused equipment. The unit converts incoming control commands into regulated motor current so the connected axis can perform positioning tasks with repeatable motion. This model uses a command module intended for single-axis positioning, which suits standalone servo axes and indexing applications. Closed-loop operation relies on digital servo feedback to maintain accurate speed and position response throughout the motion cycle.

The controller uses a 200 A power stage, and a short-term current of 90 A is available for brief overload conditions. During sustained duty, it supports a continuous mechanical load of 7.5 kW, and it can accept a short-term mechanical load of 15 kW with a mechanical peak load of 33 kW. These load figures describe how the unit handles steady operation and short bursts of higher demand during acceleration or rapid positioning. Regenerative braking energy is handled by bleeder circuitry rated at 0.25 kW continuously and 40 kW at peak. The storage path can absorb 20 kWs of returned energy, which helps the drive manage deceleration events before braking energy must be dissipated as heat.

Field wiring for process signals connects through the DEA 4.1 I/O module, which provides the interface used by the control section. Cooling is standard, and the noise class is standard for drives in the 100 A to 200 A range. The housing mass of 22 kg supports stable cabinet mounting, while the unit uses function code version 01 and hardware Version 2. Those identifiers indicate the hardware generation used for this controller. Its overall arrangement is intended for cabinet installation where the drive, signal wiring, and feedback connections are grouped around a single controlled axis.