Product Description:

The DDC01.2-N100A-DS24-04-FW is a servo drive from Bosch Rexroth Indramat's DDC Digital Intelligent Servo Drives series. It converts incoming three-phase power into regulated output for synchronous or induction motors and exchanges real-time data with higher-level controllers. By supplying closed-loop torque, speed, and position control, the unit supports packaging lines, gantry stages, filling equipment, and other automated machinery that require coordinated multi-axis motion. Its compact machine-mounted format helps reduce cabinet space while keeping the drive close to the motor and feedback connections.

The drive supplies a rated current of 100 A, which is the steady-state limit of the power section. Commands arrive through the SERCOS interface, providing deterministic fiber-optic communication with the control system. An enclosure rated IP65 protects the electronics against dust and water jets, allowing installation directly on the machine. Internal logic requires a control input of 24 V DC at 150 mA. The unit has a continuous mechanical load capability of 6 kW, allowing the axis to operate under substantial mechanical demand while standard cooling removes heat. It also uses digital servo feedback to return position data for closed-loop motion control, and the noise emission is standard for the 100 A to 200 A range.

During braking, the bleeder handles a peak of 20 kW and can absorb up to 10 kWs of regenerated energy to protect the DC bus during deceleration. The mains supply must deliver 18 kVA to cover dynamic load changes without starving the power stage. The installation mass is 22 kg, which supports machine mounting without the bulk of a larger cabinet drive. The unit uses standard cooling, and it is identified as Series 1 with Version 2 in this product line. These operating values describe the electrical load, braking capacity, and mounting characteristics of the drive.