DDC01.2-N100A-DL08-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911270593
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
50 Seconds
The Bosch Rexroth Indramat DDC01.2-N100A-DL08-01-FW is part of the DDC Digital Intelligent Servo Drives series and has a rated current of 100 Amps. This servo drive supports standard cooling, provides an IP65 protection category, and weighs 22 kilograms. Its maximum mechanical load is 17 kW, with a peak bleeder power of 20 kW.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.2-N100A-DL08-01-FW is a servo drive developed by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. Intended for closed-loop motion applications, the unit interfaces between a CNC or PLC and an Indramat motor to regulate torque, speed, and position in automated machinery. Its digital control design supports repeatable axis movement in applications that require accurate starts, stops, and speed changes. The drive is function code version 01, series 1, and version 2.
Inside the housing, a single-axis positioning command module works with digital servo feedback to control motors drawing up to 100 A. Continuous mechanical output is 6 kW and can rise momentarily to 17 kW, allowing rapid acceleration during indexing moves. The power section is rated for 18 kVA, and standard cooling dissipates 500 W of internal power loss without auxiliary blowers. This arrangement allows the unit to handle command processing, feedback evaluation, and power conversion within the same enclosure. Continuous bleeder power is 0.25 kW, while peak bleeder capability reaches 20 kW for short intervals. The sealed enclosure has an IP65 protection rating that helps keep out dust and washdown fluids when the drive is mounted outside the cabinet. The noise emission is in the standard 100 A to 200 A range.
During dynamic deceleration, the drive can absorb up to 10 kWs of regenerative energy before excess energy is routed to the bleeder stage. This helps manage energy returned from the motor during rapid stopping or reversal. Pulse-width modulation operates at 4 kHz, balancing current ripple and switching losses in the output stage. For indexing sequences that need additional but brief output, the short-term mechanical rating allows 12 kW between the continuous and peak ranges. Integrated cooling hardware and a mass of 22 kg simplify machine-side mounting without extra ducting. The housing combines the power electronics and cooling components in a layout suited to direct installation on industrial equipment.
Frequently Asked Questions about DDC01.2-N100A-DL08-01-FW:
Q: What is the peak mechanical load capacity of the DDC01.2-N100A-DL08-01-FW servo drive?
A: The DDC01.2-N100A-DL08-01-FW servo drive supports a maximum mechanical load of 17 kW for peak operation.
Q: What is the power requirement for the DDC01.2-N100A-DL08-01-FW?
A: This model requires a power supply rated at 18 kVA for operation.
Q: What protection category is provided by the DDC01.2-N100A-DL08-01-FW?
A: The DDC01.2-N100A-DL08-01-FW offers a protection level of IP 65 against dust and water jets.
Q: What type of cooling does the DDC01.2-N100A-DL08-01-FW servo drive use?
A: The cooling method for the DDC01.2-N100A-DL08-01-FW is standard cooling.
Q: What command module configuration is present in the DDC01.2-N100A-DL08-01-FW?
A: This model features single axis positioning as specified by its command module.
