DDC01.2-N100A-DL01-01-FW
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911270498
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The DDC01.2-N100A-DL01-01-FW Servo Compact Controller is manufactured by Rexroth Indramat Bosch. This controller has a Not Specified cooling type, a rated current of 100 A and a Standard (100 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) Single Axis Positioning Control Command Module.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.2-N100A-DL01-01-FW by Bosch Rexroth Indramat is a drive controller that features single-axis positioning control. It has a peak current of 100 A and a continuous current of 35 A. It has a pulse frequency of 4 kHz and a power requirement of 18 kVA. The design type of this model is 1, and it is in line 1. Its efficient functionality is facilitated by a Digital Servo type feedback mechanism, and its Ingress Protection (IP) class of the DDC01.2-N100A-DL01-01-FW is 65. It is microprocessor-controlled and offers precise controls across a wide range of speed. In general, DDC drive controllers can be configured to serve specific purposes.
The DDC01.2-N100A-DL01-01-FW is resistant to jet water and dust, and it boasts a DC bus converter and bleeder resistor. The installation altitude of this unit is 1000 meters ASL. It can be used at heights higher than 1 km but the torque and power rating will experience losses. All nominal conditions listed for the DDC01.2-N100A-DL01-01-FW applies to an ambient temperature range of 5 oC to 45 oC. Also, the max. allowable temp. is 55 degrees Celsius. It has a DSM software module that stores parameters necessary for tuning.
In the advent of overvoltage scenarios, the DDC01.2-N100A-DL01-01-FW can be protected by connecting it across a transformer. Also, the power connections on this drive controller can be protected using circuit breakers and gL-type fuses. The dynamic braking system halts the system to a standstill if a system failure occurs, and the DC bus induces a short-circuit in the advent of faults. The firmware on the DDC01.2-N100A-DL01-01-FW must be purchased separately, and its function code version is 01. Its function code is also 01. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
