DDC01.2-N050C-DS24-04-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285098
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
13 Seconds
The Bosch Rexroth Indramat DDC01.2-N050C-DS24-04-FW is part of the DDC Digital Intelligent Servo Drives series and weighs 21 kilograms. This servo drive features a peak current of 50 Amps, a standard cooling system, and is rated for a continuous mechanical load of 4 kW. It has IP65 protection and uses a SERCOS Interface command module with digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.2-N050C-DS24-04-FW is a digital intelligent servo drive manufactured by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. It supplies controlled three-phase power to synchronous servomotors and uses a SERCOS interface command module for deterministic fiber-optic communication with higher-level controllers. By converting position commands into regulated current and voltage, the unit closes the motion loop in packaging, handling, and assembly equipment that requires precise axis coordination. Because communication and power conversion are integrated in one housing, the drive can be mounted close to the motor and reduce the need for a separate cabinet-mounted power stage.
The drive draws a maximum of 6 kVA from the mains and dissipates 500 W of internal power loss while operating with standard cooling. Its PWM inverter switches at 8 kHz, supporting smooth torque production and lower acoustic noise during normal operation. The inverter can supply up to 50 A of output current, and regenerated energy is routed to an internal bleeder that continuously absorbs 0.25 kW. Continuous mechanical output is 4 kW, and short-term demand can rise to 8 kW when the application calls for brief overload capability. This power profile supports steady-state servo operation while leaving headroom for brief load changes during indexing, clamping, or transfer motions.
During rapid deceleration or fault conditions, the bleeder can tolerate a peak of 10 kW, and the drive can deliver a mechanical peak load of 8.5 kW for brief accelerations. Digital servo feedback from the connected motor returns incremental position data to the controller for closed-loop regulation, and this feedback path lets the control system compare commanded and actual motion throughout acceleration and braking. The housing is rated IP65 against dust and low-pressure water jets, and the complete unit weighs 21 kg. Installation is permitted up to 1000 m above sea level, and internal identifiers place the model in Series 1, Version 2.
Frequently Asked Questions about DDC01.2-N050C-DS24-04-FW:
Q: What type of command module does the DDC01.2-N050C-DS24-04-FW servo drive utilize?
A: This model uses a SERCOS Interface as its command module for communication.
Q: What is the peak current rating of the DDC01.2-N050C-DS24-04-FW?
A: The DDC01.2-N050C-DS24-04-FW supports a peak current of 50 A for demanding applications.
Q: What is the protection rating of the DDC01.2-N050C-DS24-04-FW?
A: This servo drive has a protection category of IP65, making it resistant to dust and directed water.
Q: What type of cooling does the DDC01.2-N050C-DS24-04-FW employ?
A: The drive features standard cooling, ensuring reliable operation under specified conditions.
Q: What motor feedback type is included with the DDC01.2-N050C-DS24-04-FW?
A: This model provides digital servo feedback for precise motor position and speed monitoring.
