Product Description:

The DDC01.2-F200A-DL01-01-FW is a digital intelligent servo drive produced by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. As a drive controller, it converts commands from higher-level motion systems into controlled current and voltage for synchronous motors used in automated machinery, positioning tables, and process lines. This allows the connected axis to follow commanded speed, torque, and position values with closed-loop regulation from the motor feedback system.

This model delivers a rated output of 200 A, so the power stage can support demanding torque loads on large servo axes. The analog output channel is programmable across ±10 V, and its 4 mA load limit helps protect the sensing electronics from overload. Liquid circulation provides liquid cooling, which keeps semiconductor temperature stable during sustained operation. A housing sealed to IP65 blocks dust and high-pressure water spray, allowing direct mounting on the machine. The integrated command module supports Single Axis Positioning, so the drive can handle point-to-point motion without relying on an external PLC for every move. Digital servo feedback from the motor encoder closes the control loop, and the braking resistor circuit uses a 75% bleeder warning threshold to flag rising regenerative load.

The internal DC link is monitored, and the Ud contact opens at 200 V to disconnect the drive during excessive regeneration. A separate Bb relay can switch control logic loads up to DC 24 V / 1 A for fault signaling and related control functions. Serial diagnostics are available through a V24, RS 232C port, and the NC interface cable can reach 20 m for remote panel installation. Function code 01 with version 01, hardware series 1, and controller version 2 distinguish this drive within the product line.