Product Description:

The DDC01.1-K200A-DL11-00/S001 is a digital intelligent servo drive produced by Bosch Rexroth Indramat within the DDC Digital Intelligent Servo Drives series. It supplies regulated power and closed-loop position control for a single mechanical axis in factory automation. Its integrated command module supports single-axis positioning, so the drive can execute stored machine moves without an external motion controller. This arrangement suits automated equipment that uses repeatable point-to-point travel, indexing, or feed movements on one axis. The drive is series 1 and version 1.

It operates from a three-phase input of 3 × 230 V AC (+10%/-15%) and can continuously deliver up to 200 A of output current to the connected motor. Heat is removed by natural convection air cooling, so no forced-air device is required. The embedded controller can store up to 3000 blocks of motion code, and the single-axis positioning module sequences those blocks in real time during repetitive machine cycles. For system monitoring, the diagnostic output provides a differential signal of ±10 V. The diagnostic load is limited to 4 mA, which helps keep the feedback circuit lightly loaded and easy to interface with external monitoring equipment.

The enclosure is rated IP65, which helps protect the electronics from dust and low-pressure water jets. Digital servo feedback signals can be routed over cables up to 75 m long without loss of resolution, giving more flexibility when the motor and drive are installed apart from each other. An overvoltage trip activates at 475 V to protect the bus capacitors during abnormal line or regeneration conditions. The ready relay switches ancillary circuits at DC 24 V/1 A. Power-on circuitry also tolerates an AC 230 V/6 A load for predictable startup behavior in standard industrial power systems.