Product Description:

The DDC01.1-K200A-DL02-00 is a digital intelligent servo drive produced by Bosch Rexroth Indramat and assigned to the DDC Digital Intelligent Servo Drives series. The drive belongs to the Digital Intelligent Servo Drive product group and is part of Series 1, Version 1 of the platform. A built-in single-axis positioning command module lets the unit generate motion profiles internally, reducing PLC load in automated machinery. Within an installation, the drive supplies regulated current to a matched servo motor while monitoring encoder signals, yielding closed-loop torque, speed, and position control for packaging, material-handling, and assembly systems. Its compact housing simplifies panel integration.

Electrically, the drive accepts 3 x AC 230 V mains and delivers up to 200 A of output current, providing high instantaneous torque without external boosters. To protect components, an overcurrent trip engages at 1.5 times the rated current, while the DC link is safeguarded by overvoltage and undervoltage limits of 475 V and 200 V, respectively. Digital servo feedback from the motor supports precise vector calculations, and the noise emission is standard for the 100 A to 200 A range, supporting use in typical factory environments. A minimum on-pulse width of 100 ms supports reliable recognition of control signals.

A holding brake engages at 10 min⁻¹ shaft speed and is released with 24 V DC. Its service life is rated for 20,000 revolutions before wear inspection. During emergency stops, the drive limits the stopping time to a maximum of 0.4 s, then opens output power after a 500 ms torque-disconnect delay so downstream devices are isolated. Thermal stress is moderated by natural convection air cooling, eliminating the need for forced ventilation. Application logic is stored in up to 3000 user program blocks under Function Code 02, enabling homing, indexing, and coordination routines without additional motion controllers.