Product Description:

The DDC01.1-K200A-DA07-01/S001 is a servo drive manufactured by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. It combines power electronics and control logic in a single housing for closed-loop industrial motion systems. During operation, the unit receives velocity or torque commands from a PLC or motion controller and regulates the three-phase power delivered to a compatible motor. Its internal control loops adjust motor current in response to command and feedback data, supporting accurate positioning, controlled acceleration, and stable speed under changing loads.

The drive uses an analog interface that accepts compatible voltage or current command signals and routes them to the control electronics. Its rated current is 200 A, providing the output capacity needed for motors used in demanding industrial axes. Heat is dissipated through natural convection air cooling, with enclosure fins transferring thermal energy to the surrounding air without a cooling fan. Rotor position and velocity data are supplied through digital servo feedback, allowing the control loop to correct motion errors and maintain stable operation. The unit carries Function Code 07, which identifies the installed application functions and associated parameter structure for the supported drive configuration.

Noise emission is classified as Standard (100 A to 200 A), indicating the applicable acoustic category for a drive within this current range. The product carries Function Code Version 01, which identifies the revision of the functions associated with its command module. The drive is part of Series 1 and uses Version 1 of the platform design. These product revisions correspond to the unit’s established housing arrangement, electrical interfaces, and terminal organization. The integrated control electronics process command and feedback signals locally, while the power stage supplies regulated motor current for torque, speed, and position control in automated machinery.