Product Description:

The DDC01.1-K150A-DA01-00 is a servo drive manufactured by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. It is supplied in Series 1 and Version 1, and it works with an analog command module for reference input. By accepting velocity or torque commands and returning position data through digital servo feedback, the unit performs closed-loop motor control for packaging equipment, transfer systems, and other automated production lines. This arrangement allows the drive to regulate motor response continuously as operating conditions change.

This drive is designed for a three-phase supply of 3 × 230 VAC, and under that input it delivers a continuous output of 150 A. Protective limits are built in, with the overcurrent trip activating at 225 A and the DC bus disconnecting when link voltage reaches 475 V. The enclosure carries an IP65 rating, so it can be mounted directly on machinery while resisting dust ingress and low-pressure water exposure. Heat is removed by natural convection air cooling, so no fan is required for normal operation. To keep passive cooling effective, the unit needs an open path for rising warm air and unobstructed side clearance around the housing. The noise emission is standard for this current class.

The housing dimensions affect installation clearance and overall layout. With an add-on blower, the height reaches 775 mm, and without that accessory it measures 635 mm. Effective chimney action requires a free vertical channel of 300 mm for rising warm air, and nearby components should be placed at least 65 mm from the sides of the drive. The compact housing helps conserve panel width in machine-mounted or enclosed layouts. Function code 01 is used for the standard parameter set on this unit, and the analog interface can be connected directly to machine I/O for command handling.