DDC01.1-K150A-D Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265172
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
39 Seconds
The Bosch Rexroth Indramat DDC01.1-K150A-D is part of the DDC Digital Intelligent Servo Drives series and features a rated current of 150 Amps with a supply voltage of 3 x 230 V AC. This drive uses digital servo feedback for motor control and is cooled by natural convection air. The unit also has a control voltage of 24 V DC and measures 635 mm in height without the blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.1-K150A-D is one of the DDC Digital Intelligent Servo Drives units manufactured by Bosch Rexroth Indramat. It functions as a closed-loop controller that supplies regulated current to synchronous motors used in packaging lines, material handling axes, and other precision motion tasks within automated cells. By integrating velocity, position, and torque control in one housing, the drive reduces external wiring and frees the host PLC from time-critical motion calculations. This arrangement also helps the axis respond quickly to changing loads and maintain stable motion during repetitive cycles.
Operating power is accepted from a three-phase AC supply of 3 x 230 V AC, while internal logic circuits use a dedicated 24 V DC control rail. The power stage supplies a continuous output of 150 A, allowing the unit to drive large synchronous motors without thermal derating under normal conditions. DC-bus supervision trips the drive when voltage rises above 475 V or falls below 200 V, helping protect the IGBT bridge during abnormal line conditions or regenerated energy events. Cooling is handled by natural convection through the heat sink fins, and an optional blower can be added when the installation has a higher thermal load. Digital servo feedback from the motor encoder closes the regulation loops, and the unit has standard noise emission behavior for this current class.
The housing stands 775 mm tall when the optional blower is installed, while the natural-convection version is shorter and may fit more easily in shallow cabinets. During deceleration, the brake is commanded once shaft speed drops to 10 rpm and reaches full torque after 0.4 s, which helps limit overrun on vertical or high-inertia axes. Control inputs must remain high for at least 100 ms to satisfy the minimum on-pulse requirement of the gating logic. This timing helps prevent brief or unstable control signals from being interpreted as a valid enable command, and it should be considered when the drive is connected to interlocks or other external control circuits.
Frequently Asked Questions about DDC01.1-K150A-D:
Q: What is the rated current for the DDC01.1-K150A-D servo drive?
A: The DDC01.1-K150A-D servo drive operates at a rated current of 150 A, enabling it to handle demanding motor loads efficiently.
Q: What control voltage does the DDC01.1-K150A-D require?
A: The control voltage required for this model is 24 V DC.
Q: How is the DDC01.1-K150A-D servo drive cooled?
A: Cooling is achieved by air using natural convection, so the drive does not require external forced cooling.
Q: What kind of motor feedback does the DDC01.1-K150A-D use?
A: Digital servo feedback is used for motor feedback on this drive, providing precise and reliable motor positioning information.
Q: What supply voltage is needed for the DDC01.1-K150A-D servo drive?
A: This drive operates with a supply voltage of 3 x 230 V AC, suitable for standard three-phase industrial power sources.
