DDC01.1-K100A-DS50-01
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
18 Seconds
The DDC01.1-K100A-DS50-01 digital servo drive operates with an input voltage range of 3×230 V (+10%/-15%) or 3×220 V (+15%/-10%), supports peak currents up to 200 amps depending on the model, includes integrated DC bus dynamic braking, and features IP65 protection. Part of the DDC Digital Intelligent Servo Drives by Bosch Rexroth Indramat, it offers programmable fault responses.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.1-K100A-DS50-01 Servo Drive belongs to the DDC Digital Intelligent Servo Drives series. It is built by Bosch and it is known for its durability, high efficiency and effectiveness.
The DDC01.1-K100A-DS50-01 servo drive includes a designated slot for the firmware chip or module. It can deliver 100 Amperes current to the motor momentarily without damage. The environmental temperature range in which the servo drive can safely operate is +5 to +45 degree Celsius. It uses a digital method such as encoder or resolver to receive precise positional and velocity data from the motor which enables accurate closed loop control. It is able to handle and redirect up to 10 kilowatts of braking energy, either to a resistor or back to the grid. The acceptable deviation from the rated voltage that the drive can handle without malfunctioning is ±15%. The communication module inside the drive is SERCOS which specifies that the module communicates via this interface. It includes five PCI (Peripheral Component Interconnect) slots for expansion cards which could be used for additional interfaces, memory or functionality upgrades.
The DDC01.1-K100A-DS50-01 servo drive has an IP65 protection rating which suggests it is completely dust-tight and protected against low-pressure water jets. The module uses an onboard microprocessor for control logic which enables advanced features like real-time decision-making, motion profiling and diagnostics. The drive has a standard communication port such as RS 232 which is often used for configuration, diagnostics or command input/output with a PC or controller. It conforms to industry norms for acoustic or electromagnetic noise. It also has a built in or external resistor with 0.25 kW bleeder which is used to dissipate excess braking energy.
Frequently Asked Questions about DDC01.1-K100A-DS50-01:
Q: How does the U5 firmware slot benefit the DDC01.1-K100A-DS50-01 Servo Drive?
A: The U5 slot allows easy firmware upgrades without replacing the hardware. This improves drive flexibility and ensures future compatibility.
Q: Why is a ±15% voltage tolerance important in the DDC01.1-K100A-DS50-01 Servo Drive?
A: It protects the drive from damage caused by power fluctuations. This feature increases overall system reliability and uptime.
Q: How do the 5 PCI slots enhance the functionality of DDC01.1-K100A-DS50-01 Servo Drive?
A: They allow easy integration of additional modules like I/O cards or communication interfaces. This makes the drive highly adaptable to specific applications.
Q: What advantage does SERCOS interface offer to the DDC01.1-K100A-DS50-01 Servo Drive?
A: SERCOS provides real-time communication with minimal latency. This ensures synchronized motion control across multiple devices.
Q: Why is an IP65 protection rating critical for the DDC01.1-K100A-DS50-01 Servo Drive?
A: It safeguards the drive against dust and low-pressure water jets. This makes it ideal for harsh industrial environments.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.
Copyright © 2025 - Wake Industrial - All Rights Reserved