DDC01.1-K100A-DL05-00 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911257399
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
17 Seconds
The Bosch Rexroth Indramat DDC01.1-K100A-DL05-00 is a digital intelligent servo drive from the DDC Digital Intelligent Servo Drives series. It offers a rated current of 100 Amps and operates with a control input voltage of 24 V DC and a control input current of 150 mA. This servo drive has an analog output voltage range of ±10 V and supports single axis positioning through its command module.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.1-K100A-DL05-00 is a digital intelligent servo drive from Bosch Rexroth Indramat in the DDC Digital Intelligent Servo Drives series. Installed between the motion controller and an Indramat AC servo motor, it regulates current, velocity, and position so automated axes follow programmed trajectories accurately. The unit uses Function Code 05 and Version 1, and it includes a factory-installed single-axis positioning module for general-purpose machine tools, packaging lines, and material-handling stations. This arrangement lets the drive handle both power conversion and axis positioning functions in a compact single-axis setup.
The drive provides an analog command channel that outputs ±10 V with a maximum load of 4 mA, allowing proportional speed or torque references to external equipment. That analog interface supports systems that require a standard voltage command for coordinated motion control. Control electronics draw 150 mA at 24 V DC, while the power section delivers a rated motor current of 100 A for dynamic acceleration of medium-inertia servomotors. Cooling relies on natural convection through the finned housing, so no added blower is required. The noise emission is standard for the 100 A to 200 A range. The integrated single-axis positioning module executes movements directly and accepts limit switch, probe, and drive-enable inputs on the control terminal while using digital servo feedback from the connected motor.
User communication is handled through a RS 232/RS 485 serial interface on a 9-pin D-sub male connector. A 34-pin female CTA service port is provided for parameter backup and other service access functions. Program memory stores up to 3,000 blocks, allowing the axis to perform complex positioning sequences without a separate PLC. Feedback wiring may extend to 75 m, and the sealed IP65 housing allows the drive to mount directly on the machine frame where coolant splash and dust are present. Direct mounting keeps the power stage close to the motor and reduces cable distance around the axis.
Frequently Asked Questions about DDC01.1-K100A-DL05-00:
Q: What is the rated current capability of the DDC01.1-K100A-DL05-00 servo drive?
A: The DDC01.1-K100A-DL05-00 supports a rated current of 100 A for demanding applications.
Q: What level of environmental protection does the DDC01.1-K100A-DL05-00 offer?
A: This drive features a protection category of IP65, making it suitable for installation in environments exposed to dust or low-pressure water jets.
Q: Which type of motor feedback does the DDC01.1-K100A-DL05-00 use?
A: Motor feedback for this model is achieved via digital servo feedback, ensuring precise control and position monitoring.
Q: What kind of positioning functionality is included in the command module of the DDC01.1-K100A-DL05-00?
A: Its command module supports single axis positioning, allowing control of a single motor axis per drive unit.
Q: How is the DDC01.1-K100A-DL05-00 servo drive cooled?
A: The DDC01.1-K100A-DL05-00 uses natural convection air cooling, operating without the need for forced cooling systems.
