DDC01.1-K050A-DS60-50-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat DDC01.1-K050A-DS60-50-FW is part of the DDC Digital Intelligent Servo Drives series. This servo drive features a SERCOS Interface command module and supports digital servo feedback for motor control. It operates at an input voltage of 3 x AC 220/230 V and offers an IP65 protection category.
Internal Product Review
The DDC01.1-K050A-DS60-50-FW is a Bosch Rexroth Indramat digital intelligent servo drive with a SERCOS interface. IP65 protection and natural convection cooling make the drive especially appealing for demanding servo installations. A 50 A rated current is a strong finishing point for dependable motion control performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.1-K050A-DS60-50-FW is a digital servo drive manufactured by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. It converts incoming three-phase power into controlled motor current for synchronous or induction motors used in automated handling, printing, and packaging equipment. In typical automation systems, it regulates torque and speed so the connected axis can respond accurately to changing motion commands. By combining power electronics, axis control, and communication functions in one housing, the unit supports closed-loop motion control while keeping the installation footprint compact.
The unit provides a continuous output of 50 A and operates from a mains supply of 3 x AC 220/230 V at 50-60 Hz. Its enclosure is rated IP65, which helps protect internal components from dust and low-pressure water jets in exposed mounting locations. This sealed housing allows the drive to be placed closer to the machine when a protected exterior installation is needed. Motion commands are exchanged through the SERCOS interface, while digital servo feedback from the motor supports accurate position comparison and stable speed regulation during operation. The controller uses function code 60 and is identified as design series 1, version 1 within this product line.
Thermal management relies on natural convection air cooling, so the unit does not require forced-air cooling hardware. A front-panel RS-232 service interface supports diagnostic access and parameter adjustments, making local communication straightforward when the axis must be checked or adjusted. For proper airflow, the installation should maintain 300 mm of clearance above and below the heat sink. Keeping this space open helps heat rise away from the unit and reduces thermal buildup around nearby equipment. The controller backplane includes 5 plug-in slots for option modules such as extended I/O or additional feedback channels, and this modular layout allows the base controller to support different interface combinations.
