DDC01.1-K050A-DL04-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911266459
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DDC01.1-K050A-DL04-01-FW is part of the DDC Digital Intelligent Servo Drives series and features a single axis positioning command module with a rated current of 50 Amps. It offers digital servo feedback, supports 15 programmable logic controller inputs and 16 outputs, and uses air cooling with natural convection. The drive has a width of 500 mm, an IP65 protection category, and includes both RS-232 and RS-485 serial interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the DDC01.1-K050A-DL04-01-FW for the DDC Digital Intelligent Servo Drives series. The product integrates a regulated inverter, a single-axis positioning command module, and local I/O to execute precise servo loops in packaging lines, pick-and-place gantries, and similar machinery. This combination lets the unit handle motion sequencing and machine signaling within the same housing. Acting as the drive, it converts mains power into controlled motor current while monitoring digital feedback to maintain programmed trajectories. It is suited for machines that need single-axis positioning with onboard control functions in a compact drive package.
Line power is accepted through a three-wire three-phase AC input operating at 50/60 Hz. The converter is designed for a continuous 50 A output to the motor, and a short-circuit limit of 350 mA protects the control electronics. Natural convection through an internal air path cools the power section, so no forced ventilation is required. The single-axis positioning module stores 3,000 blocks of motion code, and the integrated PLC exposes 15 inputs / 16 outputs for machine signaling. These onboard signals can be used for interlocks, sensors, and output commands tied to stored motion routines. Connections are sealed to IP65, and motor feedback arrives as digital servo feedback.
The internal diagnostics area draws 100 mA from a dedicated 24 V DC rail, isolating low-level sensors from the high-energy motor bus. This separate low-voltage supply helps keep diagnostic and sensor circuits apart from the power section during operation. Program and diagnostic data travel on a serial port that presents RS-232 or RS-485 levels through a 9-pin D-sub, while a 34-pin female header links to a detached keypad or display. The drive is Series 1 and Version 1.
Frequently Asked Questions about DDC01.1-K050A-DL04-01-FW:
Q: What is the rated current supplied by the DDC01.1-K050A-DL04-01-FW servo drive?
A: The DDC01.1-K050A-DL04-01-FW servo drive delivers a rated current of 50 A for standard operation.
Q: What type of serial interface does the DDC01.1-K050A-DL04-01-FW feature?
A: This drive supports communication through a 9-pin D-sub connector with RS-232/RS-485 serial interfaces.
Q: What type of cooling is used in the DDC01.1-K050A-DL04-01-FW servo drive?
A: The DDC01.1-K050A-DL04-01-FW utilizes a natural convection air cooling system.
Q: How many PLC inputs and outputs are available on the DDC01.1-K050A-DL04-01-FW?
A: The drive includes a PLC I/O configuration of 15 inputs and 16 outputs.
Q: What is the protection rating of the DDC01.1-K050A-DL04-01-FW servo drive?
A: This servo drive provides a protection category of IP65, offering protection against dust and water spray.
