Product Description

The DDC01.2-N100A-DC04-01-FW by Bosch Rexroth is a high-dynamics and high-performing DDC drive unit rated at 100 Amperes. This unit has a state-of-the-art design and offers high precision control of corresponding machines. Also, the parameterization and control operations of this unit are facilitated by micro signal processors. The DDC01.2-N100A-DC04-01-FW comes as a completely assembled setup and features plug-in modules, a command interface plug-in card, a software module and a rating plate. It utilizes a digital servo motor feedback, and its function code version is 04. The firmware on this drive must be purchased as a separate subitem.

The command interface module that is suitable for use with the DDC01.2-N100A-DC04-01-FW is the INTERBUS-S type. The IP class of this unit is 65. It comes designed with a mains contactor, integrated bleeder resistor and a dedicated power section. It can efficiently achieve direct feeder installation, and its installation is space-saving. The diagnostic feature of the DDC01.2-N100A-DC04-01-FW is extensive and facilitated by its alphanumeric display. This unit can be pre-programmed to force an error response, should a system, drive or power failure occurs.

Plug-in modules can be used to direct the functionalities of this equipment towards specific applications. As a protective measure, this drive slows down and shuts down if an electronic circuitry problem occurs. The halting actions are supported by the integrated braking system available to the DDC01.2-N100A-DC04-01-FW. It boasts a longer life span due to its integral protection system and currentless switching. The bleeder available to the DDC01.2-N100A-DC04-01-FW has a continuous power rating of 250 Watts and a continuous current rating of 35 Amperes. A basic unit of the DDC01.2-N100A-DC04-01-FW weighs 22 kg and utilizes a natural convective method of heat withdrawal. This unit can be shipped globally with a one-year warranty period from Wake Industrial.