Product Description

The DDC01.2-N050C-DS46-02-FW Bosch Rexroth digital servo drive uses a motor power cable and a motor feedback cable for connection with the MDD series AC servomotor. The product is widely used for precise servo applications due to the rotor position measurement of high resolution. The device supports direct installation on a feeder even under adverse conditions. Its basic unit is integrated with a bleeder resistor and a DC bus converter. This resistor and bus converter is used for the energy that is generated due to a braking action. The drive also contains a mains connector to disconnect the power when needed. The configured product is considered to be a completely assembled unit.

This servo drive with a version code of 2 is cooled by air circulation during operation. The device has a short-term current of 50A for 50% at 100s duty cycle time. The unit also has a peak bleeder power of 10kW. It can function at a maximum temperature of 55°C with a drop in power and torque. The product must have neither condensation nor non-conductive dirt contamination on its surface. The drive features connections to the motor power and mains at its bottom. The slot dedicated for the software module and the configuration rating plate is present on the top of the device.

The digital drive houses an S1 fault reset key and anH1 LED status display. This display highlights the warning and error messages encountered during operation. The command module of the device is inserted in the U1 slot. The cable leadthrough of the drive is located just above the motor power connection. The motor feedback cable used with the product should be connected properly to retain the IP 65 protection rating. We can send this servo drive anywhere across the globe through reputed logistics partners, with a one-year warranty.