DDC01.1-F200A-RS24-03-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DDC01.1-F200A-RS24-03-FW is part of the DDC Digital Intelligent Servo Drives series and weighs 22 kilograms. This drive features a SERCOS communications interface and offers a rated current of 200 Amps with a continuous current of 45 Amps. It also includes IP65 protection and supports resolver motor feedback as well as a continuous bleeder power of 0.25 kW.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.1-F200A-RS24-03-FW is a digital AC servo drive produced by Bosch Rexroth Indramat in the DDC Digital Intelligent Servo Drives series. It conditions line power and delivers controlled current to synchronous motors for positioning tasks in packaging lines, handling robots, and machine tools. An IP65 housing allows installation directly on the machine frame, and a SERCOS fiber-optic interface carries real-time commands and status between the drive and a central motion controller.
At full load the drive supplies a 200 A rated current, while its 45 A continuous current (average) maintains thermal stability during steady operation. For rapid accelerations it permits 90 A short-term current under a 50 % S6-100 s duty cycle. The power section can draw up to 22.5 kVA from the mains, and, with the bleeder disabled, releases 500 W of internal loss that must be dissipated by the mounting surface. Current is modulated with a 4 kHz PWM carrier that minimizes torque ripple, and resolver feedback is sampled in synchronism with this switching pattern to preserve control accuracy.
During braking, energy is routed into the internal resistor, which handles 0.25 kW of continuous power and withstands 40 kW peak bleeder power for short deceleration events. Motor leads may run up to 75 m, allowing the drive to remain outside moving zones. Installation is permissible to 1000 m above sea level without derating, and the unit tolerates storage temperatures to +85 °C.
Frequently Asked Questions about DDC01.1-F200A-RS24-03-FW:
Q: What communications interface does the DDC01.1-F200A-RS24-03-FW drive use?
A: The DDC01.1-F200A-RS24-03-FW digital drive is equipped with a SERCOS communications interface, providing compatibility with standardized industrial networks.
Q: What is the rated current of the DDC01.1-F200A-RS24-03-FW servo drive?
A: This model operates at a rated current of 200 A, supporting high power servo applications.
Q: What type of motor feedback does the DDC01.1-F200A-RS24-03-FW support?
A: The DDC01.1-F200A-RS24-03-FW provides resolver-based motor feedback for precise position feedback during operation.
Q: What is the maximum installation elevation for the DDC01.1-F200A-RS24-03-FW?
A: This drive can be installed at elevations up to 1000 meters above sea level without performance derating.
Q: What protection category does the DDC01.1-F200A-RS24-03-FW offer?
A: The DDC01.1-F200A-RS24-03-FW is designed for IP65 protection, which means it is dust tight and protected against water jets.
