Product Description:

The DDC01.1-F050A-DS57-00-FW is a servo drive controller produced by Bosch Rexroth Indramat for the DDC Digital Intelligent Servo Drives series. It links a motion CPU with a three-phase servomotor by regulating current and monitoring feedback so commanded speed, torque, and position are maintained. The drive is applied in assembly lines, pick-and-place stations, and packaging equipment where closed-loop motion must be repeatable without continual manual adjustment.

At the control level, the drive hosts a SERCOS Interface, providing deterministic fiber-optic communication with a master controller and removing analog wiring. Thermal management relies on liquid cooling, so heat is carried out through a coolant circuit rather than panel airflow, permitting dense cabinet layouts. Rotor position data comes from Digital Servo Feedback, giving high-resolution signals that support tight velocity loops. The enclosure meets IP65, keeping dust out and tolerating low-pressure water jets so the unit can mount directly on moving axes. Its power section supplies 50 A of continuous current, allowing matched motors to develop high peak torque before the drive reaches its limit.

The acoustic rating Standard (100A - 200A) shows that noise emission remains within normal limits for drives of this size, avoiding extra sound insulation. As a Digital Intelligent Servo Drive, the unit contains self-diagnostics that link feedback data with bus traffic for rapid fault tracing. The label lists Series 1, indicating the first mechanical platform, and Version 1, aligning hardware with the initial control electronics.