Product Description

Bosch Rexroth offers a vast array of products that can meet the needs of any client, from small businesses to large industrial corporations. In addition to motors, Rexroth also produces electric drives and control systems.

The CSH01.1C-PL-ENS-NNN-MEM-S1-S-NN-FW model is equipped with a parallel interface master communication module requiring 1 W of power. This control section's X4 slot is occupied by an IndraDyn/hiperface/1Tpp encoder that consumes 6 watts of power. The CSH01.1 control section must not be used if operating conditions deviate from the specified ambient conditions. This includes conditions such as underwater operation, extreme temperature fluctuations, and extremely high maximum temperatures. The firmware of the device serves multiple purposes. Nonetheless, it is sold separately. Existing device variants with varying drive power and interfaces permit application-specific utilization of the drive controller. The model's four digital outputs and one analog input must be calibrated prior to the execution of various application tasks. The PWM frequency of the control section can be adjusted in 2 kHz increments between 2 and 16 kHz. The control section has a single RS232 serial port and a 250-microsecond SERCOS cycle duration. This model's X10 slot is equipped with a 2-watt encoder emulator. The user-friendly control panel of the CSH01.1 control section consumes 1 watt.

The model CSH01.1C-PL-ENS-NNN-MEM-S1-S-NN-FW has four digital outputs, a control range of 62.5 to 125 microseconds for the current, and a control range of 250 to 500 microseconds for the position. Install or utilize the electric drive and control system components after reading the manual. The model must be used with its authorized drive controller under specified environmental conditions. The control section contains an S1 safety motion. This item (CSH01.1C-PL-ENS-NNN-MEM-S1-S-NN-FW) is available for shipment from Wake Industrial to the provided address.