Product Description

The Bosch CSB01.1C-CO-ENS-MEM-L1-S-NN-FW is a control section. It is designed for Bosch IndraDrive controllers. Three types of control sections are available including advanced, basic universal and basic. The CSB01.1C-CO-ENS-MEM-L1-S-NN-FW belongs to the category of basic universal control sections. A type plate is attached to the unit for identification. It lists information such as the type code and the serial number. The functionality of the unit is determined by the firmware. A type plate is also attached to the CSB01.1C-CO-ENS-MEM-L1-S-NN-FW for the installed firmware. The information on this type plate can be used to identify the exact firmware version that is installed. The CSB01.1C-CO-ENS-MEM-L1-S-NN-FW can be commissioned via a standard control panel. The control panel has to be connected before the control section is switched on. The control panel includes both a display and a keypad.

The keypad on the control panel can be used to call up operating status and error messages. The keypad can be used to issue a limited number of controller commands. The display allows monitoring of controller operating status. Master communication on the CSB01.1C-CO-ENS-MEM-L1-S-NN-FWis CANopen/DevicNet. Slot 1 on the unit contains an encoder IndraDyn nodule. Slot 2 on the unit contains an encoder emulation module. The slot for safety modules contains a module that enables starting lockout. A RS-232 serial interfaces on the CSB01.1C-CO-ENS-MEM-L1-S-NN-FW can be used for communication with other serial-enabled devices such as terminals. The switching frequencies that are supported on the device include 2 kilohertz, 4 kilohertz and 8 kilohertz. The minimum supported SERCOS cycle time is 1000 microseconds. The supported current control cycle time is 125 microseconds. Only suitably qualified personnel should install and operate the unit. This unit can be shipped globally with a one-year warranty period from Wake Industrial.