CSB02.5B-ET-EC-NN-NN-DA-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911344566
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat CSB02.5B-ET-EC-NN-NN-DA-NN-FW is part of the CSB Drive Controllers series and features a Multi-Ethernet communication interface with two Ethernet ports supporting IEEE 802.3. It offers multi-encoder support, on-board I/O with 11 digital inputs, 5 digital inputs/outputs, 3 analog inputs, and 2 analog outputs, along with a voltage input resolution of 14 bit.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSB02.5B-ET-EC-NN-NN-DA-NN-FW is a compact drive controller from Bosch Rexroth Indramat in the CSB Drive Controllers series. It serves as the control center for servo and spindle axes by linking feedback devices, field networks, and local signals to generate precise position, speed, and torque commands. Designed for cabinet installation, the unit integrates motion logic, real-time Ethernet routing, and onboard diagnostics. This allows one module to coordinate multiple machine axes without relying on an external PLC for every motion task, which suits automated assembly cells, packaging equipment, and material-handling stages.
To meet networked factory requirements, the unit features a Multi-Ethernet interface with two RJ45 connectors, allowing simultaneous routing and device chaining. Encoder feeds are supported by an internal supply that delivers 500 mA at 12 V and 500 mA at 5 V, and it maintains signal integrity along cables up to 75 m. High-resolution feedback is supported by an analog bandwidth that limits sine signals to 400 kHz, while digital square-wave tracks are decoded up to 1000 kHz. This combination allows the controller to process both analog and digital encoder signals at high rates. The dual-port network layout also supports straightforward integration into line-based Ethernet topologies.
The motion section links mechanically to the HMU05 power module, and the multi-encoder interface supports incremental, sine-cosine, and absolute sensors on the same port type. The controller provides 11 digital inputs, two probe channels, five bidirectional digital lines, three analog inputs, and two analog outputs, while the DA expansion adds 6 DI, 2 DIO, 6 DO, 2 AI, and 2 AO. Each voltage input is converted at 14-bit resolution for consistent analog processing. Fast edge capture is enabled by probe inputs that accept pulses as short as 4 µs. The Ethernet hardware conforms to IEEE 802.3, and the dual relays can carry 1000 mA and switch loads up to 30 V for direct control of brakes or contactors.
Frequently Asked Questions about CSB02.5B-ET-EC-NN-NN-DA-NN-FW:
Q: What type of communication interface does the CSB02.5B-ET-EC-NN-NN-DA-NN-FW drive controller use?
A: The CSB02.5B-ET-EC-NN-NN-DA-NN-FW features a multi-Ethernet communication interface for network integration.
Q: How many Ethernet ports are equipped on the CSB02.5B-ET-EC-NN-NN-DA-NN-FW and what standard do they support?
A: This unit offers two IEEE 802.3 standard Ethernet ports for connectivity.
Q: What is the maximum supported cable length for 5 V encoders on the CSB02.5B-ET-EC-NN-NN-DA-NN-FW?
A: The maximum encoder cable length for 5 V encoders is 75 meters on this controller.
Q: What on-board I/O options are available on the CSB02.5B-ET-EC-NN-NN-DA-NN-FW controller?
A: It is equipped with 11 digital inputs, 2 probe inputs, 5 digital I/Os, 3 analog inputs, and 2 analog outputs as on-board I/O.
Q: Which power section is the CSB02.5B-ET-EC-NN-NN-DA-NN-FW controller compatible with?
A: This model is compatible with the HMU05 power section for seamless integration.
