CLC-D 1.1A-GPS-01.RS Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
35 Seconds
The Bosch Rexroth Indramat CLC-D 1.1A-GPS-01.RS is part of the CLC Motion Controllers series and features a 68EC020 CPU running at 25 MHz with a 68882 math coprocessor. It comes equipped with 1 Megabyte EPROM capacity via two sockets, 512 Kbyte SRAM, and supports 800 mA current draw at a supply voltage of +5 VDC. The controller includes two serial ports, Sercos input and output ports, and is powered by a CR2477N battery with a capacity of 0.9 Ah.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CLC-D 1.1A-GPS-01.RS is a motion controller produced by Bosch Rexroth Indramat within the CLC Motion Controllers series. As the central processor in a multi-axis drive system, it interprets program instructions, exchanges position data over SERCOS fiber links, and issues deterministic command words to downstream drives. One SERCOS input port and one output port give the unit a direct pass-through path for ring topologies, while two EPROM sockets allow control software or application code to be stored locally for standalone execution in factory automation cells.
The controller is built around a Motorola 68EC020 CPU that runs at 25.0 MHz, providing adequate cycle time for coordinated motion tasks and basic PLC logic. All logic operates from a regulated supply of +5 Vdc, so the system requires a clean backplane rail at that level. Program code resides in an EPROM array sized at 1 Mbyte, while variable data and dynamic buffers are kept in 512 Kbyte of battery-backed SRAM. Communication with external diagnostics or HMI terminals occurs through 2 serial ports that use the 8N1 format, and the Bb Contact digital I/O point can report a general fault condition to higher-level safety relays. No connection is provided on the mezzanine bus edge, leaving that space open for future options.
A lithium CR2477N cell rated at 0.9 Ah maintains the SRAM image when mains power is removed, and the board’s steady-state draw of 800 mA must be included in the cabinet’s 5 V power budget. Numeric processing for gearing ratios and interpolation is accelerated by the dedicated 68882 math coprocessor, which frees the main CPU for I/O handling. The single Bb Contact, together with the matched SERCOS ports, gives the controller a minimal discrete interface that keeps external wiring simple in retrofit and new machine installations.
Frequently Asked Questions about CLC-D 1.1A-GPS-01.RS:
Q: What type of CPU and clock frequency does the CLC-D 1.1A-GPS-01.RS motion controller use?
A: The CLC-D 1.1A-GPS-01.RS is equipped with a 25.0 MHz 68EC020 CPU for processing tasks.
Q: What supply voltage is required for the CLC-D 1.1A-GPS-01.RS motion controller?
A: This model operates with a supply voltage of +5 Vdc.
Q: How many SERCOS input and output ports are available on the CLC-D 1.1A-GPS-01.RS?
A: The controller features one SERCOS input port and one SERCOS output port.
Q: What are the memory specifications of the CLC-D 1.1A-GPS-01.RS controller?
A: It contains 512 Kbyte of SRAM and 1 Mbyte of EPROM with two EPROM sockets.
Q: What battery type and capacity does the CLC-D 1.1A-GPS-01.RS use?
A: A CR2477N (MnO2/Li) battery with a capacity of 0.9 Ah is included in this model.
