CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW

  • Rated 4.6 (17 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911330002
  • Stock: Available
  • Call for Expedited Shipping and Product Condition Options
The CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW control unit is manufactured by Bosch Rexroth Indramat. The unit utilizes SERCOS Interface as its form of master communication, and it is equipped with various interface options including Encoder Indradyn/Hiperface/1 Vpp/TLL and Encoder EnDat 2.1/1Vpp/TLL.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW

  • Rated 4.6 (17 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911330002
  • Stock: Available
  • Call for Expedited Shipping and Product Condition Options
The CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW control unit is manufactured by Bosch Rexroth Indramat. The unit utilizes SERCOS Interface as its form of master communication, and it is equipped with various interface options including Encoder Indradyn/Hiperface/1 Vpp/TLL and Encoder EnDat 2.1/1Vpp/TLL.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

 

The CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW control section offered by Bosch Rexroth is configurable and depicts two axes. The product is integrated with digital inputs and outputs according to IEC 61131 specifications. These digital inputs have a voltage rating between -3V and 30V. The probe inputs of this section work as rapid inputs. The section has a minimum SERCOS cycle time of 1000µs. This device also has two current, position and velocity control cycle times. The unit also comes with one Normally Open relay contact. It should not be removed from or plugged into the power section more than 20 times. The control section incorporates a typical inrush current of 6A.

The control section permits the connection of two conductors in a single terminal connecting point by using wires of identical cross-sections or TWIN ferrules. The spring terminals of the product have to be wired by means of wire ends without ferrules. These connections are to be done using stranded wires and not solid wires as far as possible. The device has four combined I/Os that can be configured as either digital outputs or digital inputs. The Safe Torque OFF functionality of the unit is achieved by a 9-pin D-Sub female connector at its X41 connecting point. The section comes along with backup support for one year.

This basic universal product requires a separate power supply for its isolated outputs as well as inputs and not the 24V supply of the related power section. The control panel and other connectors of the device must neither be fitted nor removed when the controller is in an ON state. Its electrical connection points are not to be touched when the power supply is ON. The unit is integrated with an EnDat 2.1 / 1 Vpp / TTL encoder at the X4.2 connecting point. This dual-axis section is dispatched through a trustworthy vendor network with a worldwide presence.

  • CDB011CSEENSEN2NNNNNNL2SNNFW
  • CDB01 1C SE ENS EN2 NNN NNN L2 S NN FW
  • cdb01.1c-se-ens-en2-nnn-nnn-l2-s-nn-fw
  • CDB1.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW

CDB01.1C-SE-ENS-EN2-NNN-NNN-L2-S-NN-FW Technical Specifications

Master Communication: SERCOS Interface
Option 1: Encoder Indradyn/Hiperface/1 Vpp/TLL
Option 2: Encoder EnDat 2.1/1Vpp/TLL
Option 3: Not Equipped
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo