Product Description

The CDB01.1C-SE-ENS-EN2-NNN-NNN-L1-S-NN-FW control section features starting lockout safety mechanism. The two-axis Bosch Rexroth section must be mounted and dismounted only by trained personnel. The device should be stored only in conductive packaging when it is kept unused for a long period. The unit is intended to be used only in its original state without any hardware modification. Its installation is to be done only according to the instructions given by the manufacturer. The section is a key part of a drive controller used in handling and mounting systems. The product may trigger high-frequency mains if it is put to operation in a residential area supplied by public low voltage mains.

The device is to be checked for proper and correct mounting, installation, transport and storage for safe and optimum operation. The unit is likely to portray high electric voltage if it is connected incorrectly. It must not be turned ON if its equipment grounding conductor has no permanent connection as per the connection diagram. This basic universal section installation has to be done only in a control cabinet. The product portrays a leakage current of more than 3.5mA. The associated drive controller must be programmed before it is put to use so that the motor performs the application-specific functions.

This product must never be operated near a radio, remote control and high-frequency equipment. The power connection to the device has to be isolated using a safe starting lockout using OFF switches/buttons to prevent unintended startup. This control section should be cooled for at least 15 minutes after turning it OFF. The product handling and mounting are to be done using appropriate equipment. The device is inserted inside the power section. The firmware of the unit has a separate type plate. This CDB01.1C-SE-ENS-EN2-NNN-NNN-L1-S-NN-FW section is available with a warranty for one year and can be shipped worldwide.