Product Description

The basic universal CDB01.1C-SE-EN1-EN1-NNN-MEM-S2-S-NN-FW control section has a MEM encoder emulator at its X8.2 connecting point. This section has a line code of 01. The product is supposed to be mounted to as well as dismounted from the power section only by skilled personnel. The device can cause high-frequency interference if it is used in residential areas. The basic universal category C3 unit should be allowed to come in contact with any exposed conductive parts such as tools only after they are properly discharged to avoid chances of damage. It has to be stored only in conductive packaging. This section must be used in only its original state.

The drive controller of the product is meant to control and monitor the operation of an electric motor. The control section is to be used only with spare parts, accessories and cables that have the approval of the manufacturer. The operation of the device is to be carried out only in the specified combination of components and configuration using the provided firmware and software. The unit operation is not supposed to take place when there are extreme variations in the surrounding temperature. It is also not to be used with a public low-voltage mains intended for residential areas.

This basic universal section has a Safe Motion optional module at the X41.1 / X41.2 connecting point. The module permits multiple application-related safety functions and is connected with a 9-pin female D-Sub connector using 0.25mm² to 0.5mm² stranded wire for the connection cable. The product has an X7 connector to insert the memory card. This two-axis device needs an external supply voltage for its digital inputs/outputs. The unit must encompass protection against polarity reversal and/or incorrect connection of the supply voltage. The control section is available with a year’s Wake Industrial warranty and can be sent to any address irrespective of the country you live in.