Product Description

The BTM15.2-NA Bosch Rexroth machine operator panel comes with an emergency stop module. This operator panel has a unique address for its motherboard. The product has an InterBus-S bus module with a remote bus and a local module. This device has a connection from the remote bus to the local bus on its motherboard. The unit comprises a basic rack. Its motherboard has 16 local inputs as well as 16 local outputs. This panel deploys an addressing system that does not need any hardware address selection. The product related emergency stop module is located in its first slot. This device portrays a supply voltage connection at the X2 connecting point. The unit features green colored RemoteBus Check and Bus Active LEDs as well as red colored LocalBus Disable and RemoteBus Disable LEDs on its back panel. It does not support operation under water. This panel should also not be used when the extreme maximum temperature is very high or there is a high temperature fluctuation. The product portrays an IP 65 protection class for its front plate in accordance with DIN 40 050 or IEC 529 specifications. This device supports an installation altitude of 1500 m over sea level. The unit has a maximum power dissipation of 20 W. It portrays Class F insulation. This panel features an ambient operating temperature range of 5 °C to 45 °C. The product has a RAL 7037 dust gray color for its front plate along with a powder-coated surface. This device should be used only for applications specified by the manufacturer. The unit must be free of condensation all the time. It supports 75% average operating humidity and 85% occasional operating humidity. This operator panel is shipped in custom military grade packaging to avoid transportation damages.