BTM04.1-TA-TA-TA-VA-2FF-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
7 Seconds
The Bosch Rexroth Indramat BTM04.1-TA-TA-TA-VA-2FF-FW is an operator panel from the BTM04 Machine Operator Panels series. It features three keyboard modules and a feed override module, each keyboard module offering 15 short stroke keys with LED illumination. The panel provides writable key labeling, three LED feed switch keys, a feed override with 16 positions for milling, and supports 24VDC digital input through connectors X28/X29.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTM04.1-TA-TA-TA-VA-2FF-FW operator panel is produced by Bosch Rexroth Indramat within the BTM04 Machine Operator Panels series. It serves as a front-end interface for CNC- and PLC-controlled machinery, allowing the user to issue commands, adjust feed rates, and monitor status directly at the machine. The panel combines tactile keys with override dials so that motion parameters can be modified without opening the drive cabinet. Because the controls are grouped on the front face, common manual inputs remain available at the operating station instead of requiring a separate control terminal.
Keyboard functions are wired to the control system through the digital input connector X28/X29, and each input line uses a control supply of 24 V DC. Feed control is handled by an override wheel with 16 discrete detents for milling operations, allowing programmed feed rates to be scaled from the panel in defined steps. The panel also includes 3 LED-equipped switches for quick incremental feed changes, so the selected state remains visible during operation. Defined detents help keep adjustments repeatable when feed motion must be raised or reduced during a machining cycle. The override hardware is installed in Module Slot 4, while Module Slots 1, 2, and 3 are occupied by keyboard modules for axis, cycle, and auxiliary commands.
Operator feedback is enhanced by global key illumination that uses a backlit LED layer, making active or unavailable functions easier to recognize under typical shop-floor lighting. Each key cap has a writable labeling field, so legends can be adapted to application-specific CNC macros, axis names, or auxiliary functions without replacing the panel hardware. The switch mechanism uses a short-stroke design that reduces travel and supports repeated actuation during frequent command entry. Every TA sub-module provides 15 keys, and supervisory data is exchanged with the machine controller through the Sot-COMM connector X8 on the carrier board. This layout supports direct access to manual commands while keeping visual feedback close to the associated controls.
Frequently Asked Questions about BTM04.1-TA-TA-TA-VA-2FF-FW:
Q: What digital input connectors are provided on the BTM04.1-TA-TA-TA-VA-2FF-FW panel?
A: The BTM04.1-TA-TA-TA-VA-2FF-FW operator panel uses X28 and X29 connectors for digital input connections.
Q: What digital input voltage does the BTM04.1-TA-TA-TA-VA-2FF-FW panel require?
A: This panel supports digital input voltages of 24VDC for its operation.
Q: How many feed override positions are featured on the BTM04.1-TA-TA-TA-VA-2FF-FW panel?
A: There are 16 feed override positions specifically designed for milling applications on this model.
Q: How many keys are included per TA keyboard module on the BTM04.1-TA-TA-TA-VA-2FF-FW panel?
A: Each TA keyboard module contains 15 keys, allowing for a high degree of control customization per module.
Q: What type of keys and labeling does the BTM04.1-TA-TA-TA-VA-2FF-FW panel offer?
A: The panel uses short stroke keys with writable labels and LED backlighting for visibility and customization.
