BTM04.1-TA-TA-TA-BA-2FF-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
8 Seconds
The Bosch Rexroth Indramat BTM04.1-TA-TA-TA-BA-2FF-FW is part of the BTM04 Machine Operator Panels series. It comes with three key modules, a blind plate in slot 4, and features 15 short-stroke keys that can be labeled and have LED illumination. This operator panel has front protection rated at IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTM04.1-TA-TA-TA-BA-2FF-FW is a machine operator panel produced by Bosch Rexroth Indramat within the BTM04 Machine Operator Panels series. Designed as a fixed-mount human-machine interface, the unit provides tactile push-button control and status feedback for CNC, packaging, or assembly workstations. In an automation cell, it connects to the drive or PLC system and gives the operator direct access to frequently used functions. The panel is intended for fixed installation rather than handheld use, and its front-mounted format helps protect internal electronics from dust and moisture around industrial equipment.
The front face carries 15 short-travel push buttons built on a short-stroke mechanism that limits key travel for rapid actuation. The reduced motion lowers wear on the switch mechanics and supports repeated input during routine machine operation. Each key cap is edge-lit by an integrated LED, so status changes remain visible in low-light enclosures and the light source adds little heat inside the cabinet. Legends can be customized because every key surface can be labeled, allowing process-specific symbols or text to be inserted without special tooling. A molded gasket and sealed membrane give the front a protection rating of IP65, which helps block dust and water jets.
Internally, the housing accepts four modular slots for its button assemblies. Slot 1, Slot 2, and Slot 3 are each populated with a Key Module, providing additional contact blocks that route button signals to the control cabinet through the panel’s backplane connector. Slot 4 is fitted with a Blind Plate, which keeps the unused position closed when no additional circuitry is installed. This arrangement separates the internal functions into clear module positions and supports orderly signal routing inside the enclosure. The closed fourth position also helps maintain the panel opening when the last slot is not used.
Frequently Asked Questions about BTM04.1-TA-TA-TA-BA-2FF-FW:
Q: What level of environmental protection does the BTM04.1-TA-TA-TA-BA-2FF-FW operator panel provide?
A: The BTM04.1-TA-TA-TA-BA-2FF-FW front panel has an IP65 rating for protection against dust and water jets.
Q: How many control keys does the BTM04.1-TA-TA-TA-BA-2FF-FW panel have?
A: This operator panel features a total of 15 keys, enabling a wide range of control operations.
Q: What type of illumination is used for the keys on the BTM04.1-TA-TA-TA-BA-2FF-FW panel?
A: The keys on this panel are illuminated by LEDs for clear visibility in various lighting conditions.
Q: What key style does the BTM04.1-TA-TA-TA-BA-2FF-FW operator panel utilize?
A: This model uses short-stroke keys for efficient and responsive tactile operation.
Q: What modules are installed in the slots of the BTM04.1-TA-TA-TA-BA-2FF-FW panel?
A: Three key modules occupy slots 1 to 3, while slot 4 contains a blind plate.
