Product Description:

The Bosch Rexroth Indramat BTM03.1-VA-BA-BA-TA-TA-TA-2FF-FW belongs to the BTM03 Machine Operator Panels series and serves as a front-mounted human-machine interface for metal-cutting equipment. The panel combines rotary overrides and short-stroke push keys so the machine operator can adjust feed rates, call axis functions, and start auxiliary cycles without opening the CNC cabinet. That arrangement keeps frequently used motion commands close to the machining area and reduces reliance on software menus for routine changes. In automated cells, it provides a direct control surface between machine logic and the user during setup and production.

The feed module is sealed to IP65, allowing washdown of the cabinet face while protecting internal contacts. One override knob is assigned to milling operation and moves through 16 positions across a programmable range of 0 to 120%, so feed can be reduced or increased to suit the material and the cut. The module also includes 3 illuminated selector keys with LED indication for accepting, holding, or resetting setpoints from the same control area. Its override logic is set for milling feed control, so the percentage command is interpreted as a feed override rather than a spindle override. Because these controls are grouped together on the front panel, adjustments can be made directly at the machine during cutting or dry-run operation.

Three key modules complete the assembly, and each module carries 15 LED-backlit pushbuttons with a short-stroke mechanism for minimal travel and long service life. This key arrangement supports numeric entry, axis jog, and canned cycle calls, while writable inserts allow the legends to match the machine function. Visual feedback is provided by a dedicated status LED bank, making active states easier to identify during operation. The layout also retains two blind plates for unused or future module positions, so open bays remain covered within the modular front panel.