BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
40 Seconds
The Bosch Rexroth Indramat BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW is part of the BTM03 Machine Operator Panels series and features a control layout of E-Stop, Key, and Feed. This panel provides three short stroke key modules with 15 writeable keys per module, and offers 16 inputs and 16 outputs through the master board I/O. The E-Stop has a locking action and includes two normally closed contacts, with a front rating of IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW is a machine operator panel produced by Bosch Rexroth Indramat within the BTM03 Machine Operator Panels series. Designed as a front-end human-machine interface for CNC and automated production centers, the unit combines emergency stop, feed-rate selection, and programmable key groups in one housing. By grouping these manual control functions, the panel lets the machine controller receive discrete commands and safety signals directly from the operator station without extra field wiring. This arrangement keeps frequently used controls in a single location, which helps maintain clear operator access during setup, jog, and intervention tasks.
The emergency section is protected to IP65, so the stop mushroom can be used where cutting fluids or dust are present. Its action is Locking; once pressed, the button stays engaged until deliberately twisted, and signaling is provided by 2 N/C Contacts that open together to force the drive and PLC to a safe state. The master board routes panel signals through 16 Inputs, 16 Outputs, giving the control cabinet a balanced channel count for hardwired logic. Safety-oriented terminals are brought out on the X28/X29 ports, which supports clean wiring to additional operator stations and keeps the emergency loop separate from general command functions.
Beyond the safety circuit, the panel supports tactile data entry through 3 key modules. Each module uses Short Stroke pushbuttons that give rapid feedback and is shipped blank so the operator can add legends with the writable key caps. Every module contains 15 Keys, allowing a broad set of machine commands to be assigned through connector X8. Feed regulation is handled separately by two rotary selectors, and the detents are divided into 16 Lock Settings so feed changes can be made in predictable steps. The control layout places the key groups and override selectors in alternating positions, which keeps the adjustment controls close at hand while leaving clear spacing between input zones.
Frequently Asked Questions about BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW:
Q: What type of E-stop action does the BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW operator panel provide?
A: The BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW panel features an E-stop with a locking action for enhanced safety.
Q: How many feed overrides are included and what type are they on the BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW panel?
A: This panel offers two feed overrides specifically designed for milling operations.
Q: How many override steps are available on this operator panel?
A: The BTM03.1-NA-TA-VA-TA-VA-TA-2EA-FW operator panel supports up to 16 lock settings for override steps.
Q: What is the input and output configuration of the master board I/O on this operator panel?
A: The master board I/O for this panel consists of 16 inputs and 16 outputs.
Q: What is the key module configuration and labeling option for this panel?
A: Each key module features 15 short stroke keys, and the labeling is writeable.
