BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
8 Seconds
The Bosch Rexroth Indramat BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW is part of the BTM03 Machine Operator Panels series. It offers 16 inputs and 16 outputs, featuring 6 module slots with components such as an Emergency-Stop Module, two keyboard writeable modules, a keyboard, a blind plate, and a feed override module. This operator panel is rated IP65 for protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW operator panel belongs to the BTM03 Machine Operator Panels series developed by Bosch Rexroth Indramat. Intended for installation on the front door of a machining center or production cell, the unit provides tactile push-button entry and hardware override functions that connect the operator directly to the drive controller or PLC. By combining field-replaceable modules behind a single sealed fascia, it removes the need for custom hard-wired stations and groups safety, jog, and auxiliary controls in one mounting location. This arrangement helps keep front-panel access organized while leaving cabinet wiring contained behind the enclosure door. Its modular face also allows machine-specific controls to be grouped in one standardized opening rather than scattered across separate stations.
It accepts 16 digital input signals and drives 16 transistor outputs, so status lamps or interlock circuits can be triggered without extra expansion boards. The faceplate carries 6 standardized slots, each factory-populated for a specific task. Slot 1 contains an emergency-stop module, providing a normally closed circuit that removes power immediately when activated. A molded gasket plus captive screws establish an IP65 front rating, keeping dust out and resisting water jets during washdown cleaning. Ribbon connectors simplify field replacement and keep wiring inside the cabinet uncluttered.
Two adjacent positions are equipped with a writable keyboard grid, allowing alphanumeric job numbers to be entered without an external terminal. Slot 4 adds a plain keyboard for dedicated function keys, and Slot 5 uses a blind plate to preserve enclosure integrity until future options are needed. Feed rate fine-tuning is handled in Slot 6 by a feed override module that scales motion commands between 0% and 120% in real time. Uniform connector pinouts across compatible machine models help the panel fit installations that use the same control layout on more than one machine type. The front layout supports direct access to frequently used machine functions without requiring a separate auxiliary station.
Frequently Asked Questions about BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW:
Q: How many inputs are available on the BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW panel?
A: This operator panel provides 16 configurable inputs for various control operations.
Q: What is installed in module slot 1 of the BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW operator panel?
A: There is an emergency-stop module installed in slot 1 to ensure rapid machine shutdown when necessary.
Q: What module is included in slot 6 on this operator panel?
A: Module slot 6 is equipped with a feed override module, allowing manual speed control adjustment.
Q: How many outputs are provided by the BTM03.1-NA-TA-TA-TA-BA-VA-2FF-FW?
A: This panel provides 16 outputs for driving external devices or actuators.
Q: What level of environmental protection does this operator panel offer?
A: With an IP65 protection rating, the panel is dust-tight and protected against water jets.
