Product Description:

The BTM03.1-NA-TA-TA-BA-BA-BA-2FF-FW is an operator interface panel produced by Bosch Rexroth Indramat for the BTM03 Machine Operator Panels series. This model combines display elements with hard-key inputs so operators can issue commands and check machine status from a single enclosure mounted on the control cabinet door. As a machine operator panel, it links directly to drives or PLCs and presents safety and process controls to the user while maintaining an industrial seal that tolerates washdown and airborne particulates on automated assembly lines.

Internally the unit follows Design 1 of the BTM03 platform and belongs to Line 3, so its wiring layout matches other third-generation panels. A master board supports 16 inputs and outputs, allowing push-buttons, indicator lamps, and relay coils to be addressed without external I/O cards. The housing carries an IP65 protection rating, which means it is dust-tight and resists low-pressure water jets when mounted flush. Expansion capacity is provided through 6 module slots, and each slot accepts keyed submodules that draw power from the common backplane. This layout keeps signal paths short and supports a compact internal arrangement.

In the factory configuration, slot 1 is occupied by an Emergency-Stop Module that provides a direct hard-wired stop channel for risk reduction. Slots 2 and 3 are fitted with writable keyboard modules, enabling operators to label membrane keys for machine-specific functions, and the duplicate installation doubles the number of assignable buttons. Slot 4 carries a Blind Plate to seal the unused bay and protect the internal electronics until expansion is needed. With these accessories preinstalled, the panel combines safety functions, command entry, and field wiring in one compact interface for motion and process automation.