Product Description:

The BTM03.1-NA-SA-TA-BA-BA-BA-2FF-FW is a machine operator panel manufactured by Bosch Rexroth Indramat for the BTM03 Machine Operator Panels series. It combines an emergency-stop, spindle speed selection, and a compact keyboard so that a machining center or production cell can be controlled from a single front plate. By bringing hardwired safety and motion override functions into one enclosure, the panel streamlines operator interaction with drives, PLCs, and other automation layers. Its layout is suited to applications where frequently used machine functions need direct physical access instead of screen-only navigation. This arrangement helps keep essential commands within reach at the machine during setup, manual jogging, and supervised production changes.

The chassis is divided into six plug-in positions, and the factory configuration reserves Slots 4-6 for future expansion while leaving the first three positions populated. A locking emergency-stop button is mounted on the dedicated safety module and is wired to 2 normally closed contacts, allowing redundant safety chains. The keyboard section relies on short-stroke switch technology, which provides tactile feedback and supports long service life. Exactly 15 keys are fitted, creating a compact matrix suitable for numeric entry, axis selection, or simple soft-key functions. A spindle override module completes the standard layout so that feed adjustments can be made without opening additional software screens. Because the safety, keyboard, and override elements are separated by module, the front panel can support a clear control layout without crowding the operator area.

Each key cap can be individually relabeled because the keyboard labeling is writable, allowing legends to be updated when machine functions change. Status indication is provided by integrated LEDs embedded in every key and in the spindle switch, making active selections easier to confirm during operation. The spindle selector supports 16 lock positions, giving repeatable detents that correspond to discrete speed percentages programmed in the drive. The panel also includes 3 rotary switch keys with LED illumination for quick toggling between coarse, fine, and jog modes without scrolling through HMI menus. Illuminated rotary controls also make it easier to distinguish active mode selections from inactive ones when ambient light is limited.