Product Description:

The BTM03.1-NA-BA-VA-TA-BA-BA-2FF-FW operator panel is produced by Bosch Rexroth Indramat within the BTM03 Machine Operator Panels series. The device provides a hardened front end for CNC and PLC systems in metal-cutting, packaging, and material-handling lines. By wiring the panel into the control cabinet, operators can issue start, stop, and jog commands while monitoring feedback LEDs without opening the enclosure. Its modular frame uses pre-defined slots for safety and override elements that match the needs of the target machine.

Mechanical survivability is enhanced by a powder-coated aluminum bezel that resists scratches and coolants. The sealed membrane and gasket meet IP65, blocking dust and low-pressure water jets so the surface can be cleaned with standard shop fluids. Control wiring terminates on a master board that provides 16 digital inputs and 16 digital outputs, giving direct links to emergency circuits, interlocks, or lamp drivers. The internal backplane accepts up to 6 plug-in modules, each addressed by the controller through the same flat-cable header. Slot 1 is factory populated with an Emergency-Stop Module, allowing the operator to de-energize the drive chain for an immediate stop.

Slot 2 holds a blind plate, preserving the seal when no functional element is required and leaving space for later changes. Motion refinement is handled by the slot-3 Feed Override Module, which provides a potentiometer so feed rates can be adjusted without editing the part program. Slot 4 is equipped with a tactile keyboard module that provides fixed machine functions such as coolant on, spindle orient, or axis reference. All components mount on a formed rear plate that weighs 3.5 kg, keeping the panel light enough for arm-mounted installations while remaining rigid during repetitive key actuation. The module arrangement also leaves unused capacity for additional interface elements within the available slot structure.