Product Description

The ADP134D-B35OA1-CS0H-A2N1 asynchronous motor depicts the R level of vibration severity. This Bosch Rexroth motor has to be mounted only on a clean surface. The mounting must be done without jamming its centering collar. This product portrays a winding code of CS. The device is to be electrically connected using only the manufacturer’s cables with extreme resilience as far as possible. The unit incorporates a bayonet lock for its power connectors. Its electrical connection must be done only after carrying out its mechanical assembly properly. The motor is connected with its fan using a 3-pin or 5-pin fan connector. The product is to be commissioned before use.

This motor dismantling action must be done after securing it and its fan against falling. The direction of rotation and reference polarity of the product must match the specifications of the machine in which the installation is done at low speed. The device depicts a very high housing temperature if it is severely contaminated or there is a fan system failure. The unit shuts down automatically when the temperature of its housing reaches 155°C. It is likely to produce vibration if its mounting has become loose and/or the bearings are worn out or have become defective.

The product along with its drive controller offers a drive solution with open functionality and high power density. The device has a maximum speed of 7,500min^-1. The unit encompasses a 100Nm holding brake that works on the electrically releasing principle. It should be put into operation in its original state without any structural changes. This motor can operate like a servo drive motor. The product is widely used in forming machines. The device might require the connection of additional sensors and actuators to control and monitor it. This ADP134D-B35OA1-CS0H-A2N1 motor has a warranty period of one year and is shipped to the selected address through reputed freight carriers.