Product Description

The ADP134D-B05OA1-CS0H-D2N1asynchronous motor from Bosch Rexroth has a squirrel cage rotor. The motor is cooled by surface convection using permanently connected fans. The product should be used with only a POWERDRIVE drive controller from the same manufacturer. The device belongs to the ADP product group of such offerings. This unit has a rated torque of 175Nm. It must be used only as intended to avoid the possibility of personal injury and/or property damage. This motor is capable of functioning like a rotary main motor. The product should not be used for applications that are not explicitly specified by the manufacturer at any point in time.

The device has high chances of having hot housing during operation. The unit features a mass of 135kg. Its faulty control can cause the associated controller to move dangerously during operation. The motor must neither be opened nor disconnected in a pressurized state. The motor is fitted with standard deep groove ball bearings. The product portrays an overall length of 750mm without the shaft. This device can be installed both horizontally and vertically. The unit supports a maximum axial force of 30N. Its grease life can be affected under adverse conditions. The motor comes equipped with a flanged socket comprising an external thread.

The product uses a straight connector or an angle connector for the encoder based on the requirement. The device is designed to support operation between 0°C and 40°C. The unit has two types of temperature sensors in its windings. It exhibits derated performance when the ambient operating conditions are exceeded. The motor can be operated in stationary and weather-protected conditions as per IEC 721-3-3 specifications. This product should at no time be put to use without a fan. The fan incorporates a blowing action. This asynchronous motor comes with a one-year warranty and can be shipped anywhere across the world based on individual preference.