ADP134C-B35OA1-DS0H-A2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285049
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The ADP134C-B35OA1-DS0H-A2N1 3-Phase Induction motor from Bosch Rexroth Indramat has a Motor Length motor length, Windings type of DS, a Plain Shaft, without Shaft Sealing Ring Output shaft, and a Design of C35.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ADP134C-B35OA1-DS0H-A2N1 asynchronous motor manufactured by Bosch Rexroth should always use a fan for its operation. The motor comes equipped with a holding brake that does not offer assurance of personal protection. This product has a frame size of 134. The device is integrated with an incremental rotary encoder. The unit features the power connection and encoder connection on the same side at the top. It also incorporates a plain smooth wave shaft that is balanced with a full key. This motor is subject to radial and axial forces on its shaft and bearings during operation. The product uses standard bearings that make it suitable for operation at high speed.
The device has a mechanical service life of 20,000 operating hours for its bearings according to ISO 281 specifications. The unit features a dynamically balancing action. It comes fitted with protective covers and sleeves. The motor components tend to get damaged if high-voltage tests are performed improperly. The product comes fitted with two type plates. The secondary type plate highlights the type designation and technical details of the device that provides the necessary information needed for service and/or repair. This ADP134C-B35OA1-DS0H-A2N1 motor features a one-year backup support period.
This product is never meant to be lifted by its fan housing. The unit installation must be done with extreme care to minimize the risk of damage and accidents. It encompasses threaded holes for fitting eyelets to help in transportation if required. The motor depicts a B05 design that makes it ideal for flange mounting. The flange is fitted on the device with the help of M16 screws that have a tightening torque of 215Nm and are inserted into drilled holes with 18mm diameter. A visual check must be done on the unit for damage to its components before it is mounted. It is possible to send this motor to anywhere in the world irrespective of the country you live in.
