Product Description

The Bosch ADP104D-B05OB1-FS0H-A2N2 is an industrial motor. It belongs to the category of asynchronous motors. As per the product type code, the motor frame size is 104 and the frame length is D. The motor mounts through holes on the flange. The ADP104D-B05OB1-FS0H-A2N2 is deployed in conjunction with a drive controller that provides power and controls motor speed and torque. The power connector is located on top of the housing on side B. ADP motors are shipped with an axial cooling fan. The ADP104D-B05OB1-FS0H-A2N2 comes with a fan that produces air flow in the blowing direction. Optional holding brakes are available for ADP motors. However the ADP104D-B05OB1-FS0H-A2N2 does not include a holding brake. Digital servo feedback is supported by the motor. This feature allows the motor to share information about its operating parameters with the drive controller.

The controller compares feedback with programmed motor parameter values. The controller adjusts its output based on the difference between programmed and actual parameter values. The shaft on the motor is plain and is supplied without a seal. The motor shaft is without a B-end. The storage level of the ADP104D-B05OB1-FS0H-A2N2 is standard and the level of vibration severity is 2. The package with the motor has a label that contains all information required to identify the equipment inside. An individual type plate on the motor lists the device designation and technical information. The ADP104D-B05OB1-FS0H-A2N2 can be installed in multiple installation positions. However, dirt and liquids can get into the motor interior if it is installed vertically, causing malfunctions or failures. The ADP104D-B05OB1-FS0H-A2N2 is intended to be professionally installed. Only approved accessories and spare parts should be used with the motor. This unit can be shipped globally with a one-year warranty period from Wake Industrial.