Product Description:

The 2AD132D-B05LA3-AS03-A3N3 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. As a three-phase drive element, the unit converts electrical energy into continuous rotational torque for conveyor sections, packaging machinery, and general motion axes in automated plants. The motor integrates into drive chains that pair an inverter with feedback to achieve closed-loop speed control across demanding duty cycles.

It uses radial blower cooling, so a side-mounted fan forces air across the stator and housing to stabilize winding temperature during continuous operation. With frame code 132, the motor matches external diameter and bolt-circle dimensions used on standardized machine plates, while length code D indicates an extended core stack that raises rated power without changing the mounting interface. Position feedback is supplied through high-resolution motor feedback, giving the connected inverter precise rotor angle information for smooth low-speed control and dynamic acceleration. To minimize structural excitation, the assembly is balanced to S1, helping keep shaft movement within limits that protect adjacent bearings, couplings, and optical encoders at high rotational speeds.

Mechanical installation is simplified by flange mounting, allowing the housing to seat directly against a machined gearbox or frame without additional feet. Power cables enter from the left side when facing the shaft. The conduit orientation is toward Side A, which keeps connectors clear of service doors on compact enclosures. The rotor is delivered without a holding brake, so stopping torque must be provided by the drive or external mechanics. The output end uses a smooth shaft without a seal, which facilitates coupling presses but requires clean ambient air because no lip seal is present around the journal.