2AD132C-B35OB2-CS03-A2N1

Product Description

The Bosch Rexroth Indramat 2AD132C-B35OB2-CS03-A2N1 is a state-of-the-art, durable motor from the 2AD Series suitable for use in tough industrial conditions.

This motor also has an optional holding brake which is an electromechanical brake that provides safe holding torque when the motor is at rest or when power is switched off. The motor is enclosed in an IP65-rated housing that ensures that the unit is dust-tight and protected from water projected by a jet from any direction, thus being suitable for use in tough environments. It also offers the insulation class F and therefore can work in higher temperatures up to 40°C. This capability guarantees that the performance is steady during fluctuations of thermal conditions. The 2AD132C-B35OB2-CS03-A2N1 has a maximum rotational speed of 4500 RPM and a rated torque of 260 Nm, which allows it to perform complex operations. It can develop a maximum torque of 390 Nm which is a good measure of power required for stern operations. The motor has a rated current of 61 A and a peak current of 92 A and a standstill current of 60 A which proves that this motor is capable of performing under various loads.

The accuracy is retained by a digital encoder with multi-turns, which ensures that the system can provide feedback and reach an accurate position when required for motion control applications. At full load, the motor is estimated to have an efficiency of about 92 percent to reduce energy wastage and improve the overall performance. The vibration has been limited to below 2.5 mm/s RMS, and the noise level is at about 68 dB(A) during full load, to reduce the noise generated. It can be stored in a temperature range of -20°C to +60°C which is quite flexible to accommodate all temperature conditions. The product can be purchased at Wake Industrial with a one-year warranty.