Product Description:

The 2AD132C-B35OB1-BS03-D2V1 is an AC induction motor engineered by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In automated plants, it serves as the primary mover for conveyors, machining spindles, and material-handling axes, delivering constant speed and torque under closed-loop control. The motor’s cast housing supports axial airflow, and its internal geometry is matched to inverter drives that regulate current and frequency for precise rotational performance.

The rotor is supported by heavy-duty bearings that withstand radial and axial forces generated during rapid indexing. Thermal energy is removed by an axial blower cooling assembly mounted on the non-drive end, so continuous duty is possible at elevated loads. Position data are supplied through high-resolution motor feedback, allowing the controller to correct slip and load disturbances in real time. The Length code C indicates the stack depth, and the Size code 132 identifies the frame diameter and mounting bolt circle. The power terminals exit toward Side B and are located on the top of the housing, simplifying conduit routing inside a cabinet.

Installation flexibility is provided by flange and foot mounting surfaces that let the machine builder choose horizontal base plates or end-shield brackets. Dynamic balance is maintained to vibration grade R, limiting transmitted oscillations to surrounding structures. The unit is supplied without a holding brake, so static load retention must be achieved by the drive or external locking devices. A keyed shaft with a shaft seal prevents lubricant loss and contamination ingress, while Side B remains without a shaft end to accommodate close-coupled fan hardware. Electrical behavior is set by winding code BS, which aligns the stator impedance with standard 400 V industrial drive systems.