Product Description
The 2AD132C-B35OA1-BS23-A2N1 is a 2AD series AC motor that can run up to 7500 revolutions per minute, and the base speed of this motor is 1500 revolutions per minute. The winding code of this motor is BS whereas the construction is flange and foot-based to help meet the demands of the varying installation requirements and conditions. The bearings in this motor are standard and are commonly known as universal due to their availability in the market.
The vibration severity grade is R which represents regular. The housing coating is black primal to enhance motor protection. The overheating inside the motor is overcome by an axial blower that has the air current direction from B to A, and the average air volume of the blower is 1000 m3/h. It is the recommended method among other methods by the manufacturer. The motor feedback is high resolution and it measures of rotor position and signals it to the drive. It is an asynchronous motor so it requires zero maintenance. The installation altitude recommended by Indramat Rexroth for optimal operation of asynchronous motor is up to 1,000 meters above sea level. The output shaft of 2AD132C-B35OA1-BS23-A2N1 is smooth which is for friction-locked shaft-hub connections. To enhance motor protection, additional shaft seals can be requested from the manufacturer as it doesn’t have a build shaft seal.
The standard bearings have a mechanical service life of 20,000 operating hours. The holding brakes installed in this 2AD132C-B35OA1-BS23-A2N1 are electrically released that have a holding torque of 30 Nm. The release delay is 120 ms whereas the clamp delay in electrically released holding brake is 65 ms. In electrically engaged holding brakes, the maximum speed is determined by the maximum braking energy, Wmax, of the holding brake which is 30,000 Ws.