Product Description:

The 2AD132C-B05OA1-BS03-E2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This frame-mounted unit supplies constant-speed or vector-controlled power to automated machinery such as conveyors, tool heads, and material-handling stages. Its model code identifies the frame size, stator length, cooling style, and winding group, giving the motor a fixed combination of electrical and mechanical features for matching drives and machine layouts. That arrangement helps maintain compatibility between the motor, its control hardware, and the intended mounting configuration.

Heat management relies on an axial blower that pushes ambient air along the stator ribs, sustaining rated current without derating at moderate cabinet temperatures. Mechanical integration is simplified by the flange mounting interface, which centers the housing and transfers torque reaction to the machine wall. Frame designation 132 sets the shaft-center height and bolt circle, while motor length code C adds extra stack depth for higher continuous output. Service wiring is routed through a top power connection, and the conductors exit toward Side A to keep the terminal area clear of adjacent drives.

Position accuracy is enhanced by high-resolution motor feedback, allowing the controller to detect minute rotor increments for smooth closed-loop vector control. The shaft is supplied without a shaft seal and is balanced with a half key, reducing circumferential drag where liquid ingress is not a concern. Dynamic behavior meets vibration grade R, limiting oscillations transmitted to gearboxes and couplings. Copper layout follows winding code BS, which aligns impedance with standard 2AD inverters. The motor uses standard bearings. Because the unit is delivered without a holding brake, external clamping devices must secure vertical loads during power loss.